Shade Sail Installation Tips: (Printable Version)
Choose a Location. Use a string attached to the intended anchor points to show the location of the shade sail and where it will project shade. Keep in mind that the actual shade sail will not have the straight lines of the string. Shade Sails are designed with a curve that deflects about 10% over the length of each edge.
Be sure to allow enough room between each corner of the Shade Sail and each Anchor Point where a tensioning device will be used. At least 2 corners must be attached with a tensioning device.
Tip: Your shade sail will be more aesthetically pleasing when the anchor points are at different heights.
Ensure that the Anchor Points are Structurally Sound. Once you decide on the placement of your sails, it is important to to ensure that the anchor points will support the loads placed on the shade sail.
- Posts
- Be sure to call Blue Stake to locate underground utilities before digging.
- Our pole kit makes an excellent temporary anchor point. See the hardware page for more details.
- If permanent posts are desired, we recommend 4” diameter galvanized steel. The concrete footings for these posts should be 24” in diameter and 48” deep. The posts should be embedded 24” into the concrete.
- Anchoring to a Structure
- The anchor point on a building must be structurally sound. If you are unsure about any of the anchor points, get advice from a builder or engineer.
- Fascia should be reinforced before being used as an anchor point.
- If a solid anchor point is not available close to the corner of your sail, you can use rope or a wire to span the distance to a suitable anchor point.
- Anchoring to a Tree
- We recommend attaching to a tree only temporarily
Tip: Ensure that each Anchor Point faces the center of the Shade Sail. This helps prevent sagging and creases.
Cleaning. Use a mild detergent and warm water, applied with a soft brush or sponge. Rinse with clean water. Caution; Chlorine and other Chemicals can cause a premature breakdown of the fabric.
Disclaimer
These instructions are to be used as a guide only. Shade Central accepts no responsibility for installations not performed by our professional installers. Check with your city’s development services department for any regulations that may apply to your installation. If you are unsure about your installation, please consult an engineer or qualified builder.
Product Warranty (Printable Version)
Your Shade Central Shade Sail was made with care using the best materials. You can expect many years of shade and UV protection from your shade sail. If the fabric of your shade sail does deteriorate to the point of cracking, splitting or tearing as a result of UV exposure within 10 years of the date of purchase, Shade Central LLC will replace the product free of charge. This warranty is subject to the following conditions.
- All claims must be submitted in writing to Shade Central LLC., 4209 S. 36th Pl., Phoenix, AZ 85040
- All claims must include a sample of the fabric and proof of purchase.
- This warranty does not cover fading, mechanical friction, damage caused by exposure to chemicals, damage caused by placing near a BBQ or open flame or tensioning the shade sail beyond its capabilities.
Care and Cleaning
Use mild detergent and warm water applied with a soft brush or sponge to clean your shade sail. Do not put your shade sail in a washing machine, dryer, or use an abrasive cleaner. Exposure to certain chemicals such as chlorine may lead to premature breakdown of the fabric.
Warning
Your Shade Central Shade Sail is designed to provide shade and protection from the Sun’s harmful rays. Periodically check that your anchor points are structurally sound and the fittings are tightly secured, re-tension if necessary. Do not use a BBQ or have an open flame under your shade sail. For safety, remove your shade sail if high wind conditions are expected.
|
Our Do It Yourself Shade Sails are manufactured to the highest quality standards.
